Compact, stand-alone control systems prepared to be mounted on a DIN rail

These multi-functional, stand-alone control, 1 phase control systems are available in two versions. With or without regenerative brask control. These control systems are duable for DC engines up to 12.2A/1.8kW
Both versions of this control system are available in three different power versions named 340, 680 and 1220.

XRi - series with regenerative break control

This 4 Quadrant regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking.

Improve your energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. No dissipation of energy in wasteful braking resistors.

The compact DIN rail mounting package can save you space as well as energy.

Three options are available for controlling DC motors up to 12.2 Amps. You can use this versatile series of fully-isolated controllers for permanent magnet or shunt wound motors.

To make your installation quick and simple, all 340XRi, 680XRi, and 1220XRi series controllers have easy to access drive adjustments, plug-on screw terminals and a small foot print from just 60mm x 105mm.

Overview

• 4 Quadrant regenerative DC motor controller
• Fully isolated control electronic
• Three different versions:

• 340 controller for DC motors rated up to 3.4 Amps (0.55KW)
• 680 controller for DC motors rated up to 6.8 Amps (0.75KW)
• 1220 controller for DC motors rated up to 12.2 Amps (1.8KW)

• DIN rail mounting
• Easy to access drive adjustments
• Plug-on screw terminals
• Small footprint
• 340 model size 105 x 60 x 120(mm)
• 680 model size 105 x 70 x 120(mm)
• 1220 model size 105 x 70 x 120(mm)
• UL, CuL, CE approved

i - series without regenerative break control

Improving or upgrading your single direction DC motor control system is easier with this series of fully-isolated controllers. The ultra compact DIN rail mounting package lets you quickly integrate the 340i, 680i, 1220i series with your existing motor control equipment.

Three options are available for controlling DC motors up to 12.2 Amps. You can use this versatile series of fully-isolated controllers for permanent magnet, shunt wound motors or universal motors.

To make your installation quick and simple, all 340i, 680i, and 1220i series controllers have easy to access drive adjustments, plug-on screw terminals and a small foot print from just 60mm x 105mm.

Overview

• Fully isolated control electronics
•Three different versions:

• 340 controller for DC motors rated up to 3.4 Amps (0.55KW)
• 680 controller for DC motors rated up to 6.8 Amps (0.75KW)
• 1220 controller for DC motors rated up to 12.2 Amps (1.8KW)

• DIN rail mounting
• Easy to access drive adjustments
• Plug-on screw terminals
• Small footprint
• 340 model size 105 x 60 x 120(mm)
• 680 model size 105 x 70 x 120(mm)
• 1220 model size 105 x 70 x 120(mm)
• UL, CuL, CE approved

Downloads

Datasheet XRi series
Datasheet i series
Manual XRi series
Manual i series

  • Copyright © 1976-2016 Elmatek AB All rights reserved.
  • Långängsvägen 5, SE-152 57 Södertälje, Sweden
  • Email: info(at)elmatek.se 
  • Tel +46 8 550 155 00


Go to top